UFGS 09 90 00 Paints and Coatings  

History: Below is a listing of the Revisions and Changes made to this UFGS.

ACTION N New R Revision C Change D Deletion
Release PA Action Change # Nature of Change or Revision
Feb-2021 N R

Complete review and update.

Aug-2020 N C 5

In response to the following CCRs: CCR 3281, corrected metric equivalent measurements in "Existing Surfaces with a Bituminous or Mastic-Type Coating" (3.5.6), "Concrete and Masonry" (3.6.1), and "New[, Existing Uncoated,][ and ][Existing Coated] Plywood and Wood Surfaces, Except Floors" (3.7.1); CCR 4282, added the options of corrosive environments to "Exterior Paint Tables" (3.15.1), EXTERIOR GALVANIZED SURFACES, "G" and "H"; CCR 6392, removed references to SCS Global; CCR 6869, removed "MPI 7" from References and replaced "MPI 7" with "MPI 6" in "Exterior Paint Tables" (3.15.1), Division 6 "A"; and CCR 8722, capitalized "Contractor" throughout.

Nov-2018 N C 4

Added note to use UFGS 03 31 29 or UFGS 03 31 30 in ESC C4 and C5 locations or where deicing salts.

Aug-2018 N C 3

Sustainability updates required to coordinate with the Federal Codes and DoD policies and procedures.

Aug-2017 N C 2

Changed Material Safety Data Sheets (MSDS) to Safety Data Sheets (SDS).

May-2013 N C 1

modified subpart 1.4.4

May-2011 N R

Modified subparts 3.2 and 3.5.3

Aug-2010 N R

Added GEI or SCS certification and other minor revisions

Feb-2010 N R

Revised note in 1.12

Aug-2008 N R

Section References (SRF) updated to MF2004 numbers

Oct-2006 N R

Sustainable changes, update MPI numbers