4
Date:
05-01-2017
Division:
Division 07 - Thermal and Moisture Protection
Status:
Active
Page(s):
29
Criteria Change Request:
Federal Facility Criteria:
UFGS 07 27 36 Spray Foam Air Barriers
History: Below is a listing of the Revisions and Changes made to this UFGS.
| KEY | PREPARING ACTIVITY (PA) | A Army | N Navy | F Air Force | S NASA |
|---|---|---|---|---|---|
| ACTION | N New | R Revision | C Change | D Deletion |
| Release | PA | Date | Action | Change # | Nature of Change or Revision |
|---|---|---|---|---|---|
| Feb-2023 | N | May-2017 | C | 3 |
In response to CCR 12503, updated SUBMITTALS article and Prohibited Materials paragraph (2.1.5) to disallow all HFC blowing agents. |
| Aug-2020 | N | May-2017 | C | 2 |
In response to CCR 8743, "Qualifications of Manufacturer" and "Qualification of Installer" were removed from SD-07 in the Submittal Article since both are already listed under SD-01. |
| Aug-2018 | N | May-2017 | C | 1 |
Sustainability updates required to coordinate with the Federal Codes and DoD policies and procedures. |
| May-2017 | N | May-2017 | N |
New specifications for open and closed cell spray polyurethane foam (SPF) air barrier systems as part of the building enclosure system. Use this section in conjunction with Section 07 27 10.00 10, BUILDING AIR BARRIER SYSTEM and Section 07 05 23 PRESSURE TESTING AN AIR BARRIER SYSTEM FOR AIR TIGHTNESS. |
WBDG Participating Agencies
